Development,validation and application of a UHPLC–MS/MS method for quantification of the adiponectin-derived active peptide ADP355 in rat plasma

A UHPLC–MS/MS method for the quantification of ADP355, an adiponectin-derived active peptide, was developed and validated. The extraction method employed simple protein precipitation using methanol and chromatographic separation was achieved on anAccucore™ RP-MS C₁₈ column (100 × 2.1 mm, 2.6 μm, 80 Å), using 0.1% formic acid in both water and acetonitrile with gradient elution at the flow rate of 400 μl/min within 4.0 min. Detections were performed under positive ion mode with multiple reaction monitoring ion transitions m/z 1109.2 → 309.8 and 871.4 → 310.1 for ADP355 and Jt003 respectively at unit resolution. The linearity range of the calibration curve was 2–1,000 ng/ml with a lower limit detection of 0.5 ng/ml. The selectivity, linearity, precision, accuracy, recovery, matrix effect and stability were validated, and all items met the requirement of US Food and Drug Administration guidance. This method was successfully applied to an intravenous pharmacokinetic study of ADP355 in rats and the in-vitro stability in rat serum, plasma and whole blood was also assessed.     

Metabolites from a New Actinobacteria,Herbidospora yilanensis

Chemistry of Natural Compounds -     

Chamigrane Sesquiterpenes from Cultures of Fungus Antrodiella albocinnamomea

Chemistry of Natural Compounds - A new chamigrane sesquiterpene, antroalbol F (1), along with one known compound, acaciicolinol C (2), were isolated from cultures of the fungus Antrodiella...     

微氧化烧结制备掺杂Y2O3的SiC陶瓷及含镉模拟废水处理

采用了微氧化烧结制备了不同Y₂O₃质量分数（0%、2%、4%、6%）的多孔SiC陶瓷，通过对陶瓷的晶体结构、微观形貌、物理性能和Cd²⁺的去除率测试发现：添加了Y₂O₃的SiC陶瓷出现了较多的第二相Y₂SiO₇、Y₅Si₃C_0.5，随着Y₂O₃的质量分数增加逐渐升高，主相的衍射峰的强度有降低。扫描电子显微镜测试发现，SiC陶瓷的尺寸在2.5 μm，Y₂O₃引入后，SiC陶瓷的晶粒尺寸降低，高温烧结时液相的含量增加，熔体粘度降低，晶粒结合更加紧密，Y₂O₃的引入提高了多孔陶瓷的体积密度，Y₂O₃质量分数为6%SiC的体积密度最大为2.21 g/cm³。热导率随着Y₂O₃质量分数的增加呈现出先升高后降低的趋势。金属Cd²⁺的过滤测试表明：随着Y₂O₃质量分数增加，Cd²⁺的残留质量浓度、膜通量和去除率先降低后升高，当掺杂质量分数为4%时，Cd²⁺残留质量浓度最低为0.042 mg/L，膜通量达到了最大值572 L/（m²·h），去除率最大为99.95%，相比未掺质量分数杂体系的去除率提高了0.14%。随着溶液pH值的逐渐增大，金属Cd²⁺的残留质量浓度逐渐降低、去除率逐渐升高，pH≥9时最终均趋于稳定。综合来看，多孔SiC陶瓷的助烧剂Y₂O₃最佳掺量为4%。     

Comments on “Experimental Measurement of Physical,Transport, and Optical Properties of Binary Mixtures of n‑Hexyl Pyridinium Nitrate [HPy][NO3] Ionic Liquid with Water,Ethanol, and Acetonitrile at 298.15 K and 101 kPa”

Journal of Solution Chemistry - A polemic is given regarding the apparent molal volumes reported in the recent paper by Mohammadi and coworkers. The authors’ calculated apparent molal volumes...     

Synthesis and Applications of SAPO-34 Molecular Sieves

Silicoaluminophosphate zeolite (SAPO-34) has been attracting increasing attention due to its excellent form selection and controllability in the chemical industry, as well as being one of the best industrial catalysts for methanol-to-olefin (MTO) reaction conversion. However, as a microporous molecular sieve, SAPO-34 easily generates carbon deposition and rapidly becomes inactivated. Therefore, it is necessary to reduce the crystal size of the zeolite or to introduce secondary macropores into the zeolite crystal to form a hierarchical structure in order to improve the catalytic effect. In this review, the synthesis methods of conventional SAPO-34 molecular sieves, hierarchical SAPO-34 molecular sieves and nanosized SAPO-34 molecular sieves are introduced, and the properties of the synthesized SAPO-34 molecular sieves are described, including the phase, morphology, pore structure, acid source, and catalytic performance, in particular with respect to the synthesis of hierarchical SAPO-34 molecular sieves. We hope that the review can provide guidance to the preparation of the SAPO-34 catalysts, and stimulate the future development of high-performance hierarchical SAPO-34 catalysts to meet the growing demands of the material and chemical industries.     

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g⁻¹, with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.     

高分辨率微型星载相机光学系统的设计及应用

为了克服太空环境的复杂性，满足航天工程的空间使用要求，研制一款2 500万像素宽光谱共焦成像的微型星载相机光学系统。该系统适应卫星发射和在轨道运行的恶劣环境，具有抗冲击震动、耐太空高温差强辐射，体积小，质量轻等优点。设计的系统可在450 nm～800 nm的谱段内清晰成像，焦距181 mm，入瞳口径45 mm，视场角10.4°，边缘相对照度0.81，轴上点MTF:0.57@55 lp/mm，0.33@110 lp/mm，畸变1.2%，镜头质量622 g，外形尺寸Φ58.3 mm×117 mm，抗辐照性能≥5 krad。通过温度适应性的模拟和优化，用户进行?30 ℃～+70 ℃光学镜头热真空试验，可正常工作。该系统已成功应用于天宫二号伴飞卫星相机中，获得的图像清晰稳定，为空间遥感实验观测发挥了重要的作用。     

CdSe波片6～12μm波段增透膜研究

采用垂直无籽晶气相升华法生长出直径37 mm的优质硒化镉(CdSe)单晶体,并沿光轴方向切割出20 mm×20 mm×3 mm的CdSe波片初胚.经研磨和抛光,在2～20μm波段CdSe波片的红外透过率约为70;.为进一步提高波片的透过率,采用Essential-Macleod软件辅助设计方案,选用YF3和ZnS为双层增透膜材料,并获得最佳的膜系厚度.镀膜后的CdSe波片在6～12μm波段透过率达到90;,在10.5μm处的透过率最高,峰值高达99;.     

基于正弦控制因子的Lateral变异鲨鱼优化算法

针对传统鲨鱼优化算法在求解高维目标函数时,易早熟收敛,陷入局部最优的缺陷.提出一种基于正弦控制因子的Lateral变异鲨鱼优化算法.通过正弦曲线的特性和自适应惯性权重,改善了传统鲨鱼优化算法中由于随机选取控制因子数值大小可能导致算法在迭代后期全局搜索能力降低的问题,提高了算法在迭代后期的全局收敛能力,并对最佳鲨鱼位置引入Lateral变异策略,加强了算法跳出局部最优的可能性.改进后的算法对多个shifted单峰,多峰以及固定维测试函数进行求解,实验结果表明,对比多种不同优化算法而言,本文所提LSSO算法具有更高的收敛精度和搜索速度.